> For the complete documentation index, see [llms.txt](https://dante-solutions-inc.gitbook.io/dante-6.3-help-documentation/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://dante-solutions-inc.gitbook.io/dante-6.3-help-documentation/introduction-2/general/analysis-type.md).

# Analysis Type

## Carb, GNitro, HTP\_Simulator, VCarb

The **GCarb, GNitro,** and **VCarb** utilities have two different analysis types, **Prediction** and **Process Design**. The **Prediction** tool outputs the carbon/nitrogen profiles, hardness, etc. based on recipe information while the **Process Design** tool outputs a recipe based on design parameters such as case depth and partial pressure.

![](https://3062023715-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0UQEr9tolIKQwZXdPc9a%2Fuploads%2Fgit-blob-3f5af01d3a7eecc21d5a819ebf6fbb5f0daa78e2%2FAnalysis_Type_1.png?alt=media)

Currently, the **HTP\_Simulator** utility only has Prediction capabilities.

## CHT\_Generator

The **TTTH Diagram** type allows the user to set the input parameters for a Time/Temperature Transformation Heating analysis

![](https://3062023715-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0UQEr9tolIKQwZXdPc9a%2Fuploads%2Fgit-blob-337ff46d2d2e358424356035eb999b94ca6f21a0%2FAnalysis_Type_2.png?alt=media)

The **CHT Diagram** type allows the user to set the input parameters for a Continuous Heating Transformation analysis

## TTT\_Generator

The **TTT Diagram** type allows the user to set the input parameters for a Time/Temperature Transformation Heating analysis

![](https://3062023715-files.gitbook.io/~/files/v0/b/gitbook-x-prod.appspot.com/o/spaces%2F0UQEr9tolIKQwZXdPc9a%2Fuploads%2Fgit-blob-0a6a40e604a870c130c270cfcf25eef074de5205%2FAnalysis_Type_3.png?alt=media)

The **CCT Diagram** type allows the user to set the input parameters for a Continuous Cooling Transformation analysis