> For the complete documentation index, see [llms.txt](https://dante-solutions-inc.gitbook.io/dante-6.3-help-documentation/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://dante-solutions-inc.gitbook.io/dante-6.3-help-documentation/readme/additional-topics-introduction.md).

# Additional Topics

This section contains additional topics not covered by the other sections of this help file. Contained in this section are discussions on:

* [Applying Mechanical Boundary Conditions in Free Space](/dante-6.3-help-documentation/readme/additional-topics-introduction/applying-mechanical-boundary-conditions-in-free-space.md): Heat treatment modeling requires components to be fixed in free space; i.e., the component should be free to expand and contract, yet unable to freely translate or rotate in space. This section examines techniques to fix different geometric shapes in free space.
* [Immersion Quench Process Modeling](/dante-6.3-help-documentation/readme/additional-topics-introduction/immersion-quench-process-modeling.md): This section discusses using a DANTE developed subroutine to perform a linear immersion quenching operation.
* [Rotational Spray Quench Process](/dante-6.3-help-documentation/readme/additional-topics-introduction/rotational-spray-quench-process.md): This section discusses using a DANTE developed subroutine to model a rotational spray quenching operation.
* [Induction Hardening Process Modeling](/dante-6.3-help-documentation/readme/additional-topics-introduction/induction-hardening-process-modeling.md): Discusses how to use DANTE to model an induction hardening process.
* [Rotational Induction Hardening Process](/dante-6.3-help-documentation/readme/additional-topics-introduction/rotational-induction-hardening-process.md): This section explains how to use DANTE to model a rotational induction hardening process.
* [Press Quench Process Modeling](/dante-6.3-help-documentation/readme/additional-topics-introduction/press-quench-process-modeling.md): Brief introduction to press quench modeling.
* [Applying Initial Stress in DANTE Model](/dante-6.3-help-documentation/readme/additional-topics-introduction/applying-initial-stress-in-dante-model.md): Applying initial stresses in heat treatment or loading models.
* [Using Map Solution Feature](/dante-6.3-help-documentation/readme/additional-topics-introduction/using-map-solution-feature.md): Using Map Solution (Abaqus) to carry over previous modeling results in a new model using DANTE.